ATS PANELS (Automatic transfer Switch)
Automatic transfer switches are used to
automatically change over from the main
electrical supply to stand-by generators on
failure of the main supply.
ATS panel system automatically detects the
power failure of the primary power supply
and switches the generator ON and when the
main supply is restored, the system
automatically changes back, and stand-by
generator will eventually be shut down after
a short cooling down period.
ATS panels are equipped with mechanically
and electrically interlocked motor driven. And
are:
a). Operated both automatically and
manually
b). Employ a Breaker closing time delay
installed to avoid current and voltage
surges.
c)Employ automated sensing for:
- Under voltage & over voltage
- Phase failure
- Phase sequence
d)Installed with Generator start/stop
commands.
e)Status signals for remote indications.
And Indicate:
-Incoming voltage
-Engine running/faulty conditions
-MCCB On/Trip conditions
Applications
It can be deployed in all areas, in particular
ATS panel is deployed everywhere where a
power failure is especially critical, e.g. in
hospitals, in conjunction with UPS systems,
and for industrial processes. With its broad
measuring voltage range panel is suitable for
use in the industry, infrastructure and
building management systems.
• General Information
The enclosure made from Electro galvanized
sheets 2mm Polyester powder coating RAL1013
• Bus Bar System
Made from pure Copper 99.9%, with tin
plated Neutral busbar are rated at 50% of
the main busbar and earth Busbar are rated
50% of the neutral busbar, Busbar rating